Air transportation safety investigation A19C0026

The TSB has completed this investigation. The report was published on 08 October 2019.

Table of contents

Wing lift strut assembly failure and collision with terrain

Piper J3C-65, C-FLDQ (privately registered)
Snowshoe Lake, Ontario

View final report

The occurrence

On , a privately registered Piper J3C-65 aircraft on skis, was conducting a VFR flight from Minaki, ON, to Snowshoe Lake, ON with 1 pilot and 1 passenger on board. While the aircraft was on a low-pass prior to the landing, the pilot lost control and the aircraft collided with the frozen surface of the lake. Both occupants sustained fatal injuries.


Safety communications

Safety advisories

2019-08-13

A19C0026-D1-A1: Federal Aviation Administration Airworthiness Directive 2015-08-04 – Reliability of Main Spar Wing Lift Strut Assembly Inspection – Punch Test Method


Media materials

News release

2019-10-08

Investigation report: Wing lift strut failure and collision with terrain
Read the news release

Deployment notice

2019-03-31

TSB deploys a team of investigators to the site of a small aircraft accident north of Kenora, Ontario

Winnipeg, Manitoba, 31 March 2019 - The Transportation Safety Board of Canada (TSB) is deploying a team of investigators to the site of yesterday’s accident involving a Piper J-3 Cub that occurred north of Kenora, Ontario. The TSB will gather information and assess the occurrence.


Investigation information

Map showing the location of the occurrence


Investigator-in-Charge

Photo of Eckhard Dittbrenner

Eckhard Dittbrenner has more than 35 years of civil aviation experience and joined the TSB in 1999. Prior to joining the TSB, he worked as an aircraft technician for a commuter airline and worked for Transport Canada Aviation Enforcement for eight years. Since joining the TSB, Mr. Dittbrenner participated in several TSB investigations, including the investigation into the 2005 Air France accident at Pearson Airport in Toronto.


Photos


  Download high-resolution photos from the TSB Flickr page.

Class of investigation

This is a class 4 investigation. These investigations are limited in scope, and while the final reports may contain limited analysis, they do not contain findings or recommendations. Class 4 investigations are generally completed within 220 days. For more information, see the Policy on Occurrence Classification.

TSB investigation process

There are 3 phases to a TSB investigation

  1. Field phase: a team of investigators examines the occurrence site and wreckage, interviews witnesses and collects pertinent information.
  2. Examination and analysis phase: the TSB reviews pertinent records, tests components of the wreckage in the lab, determines the sequence of events and identifies safety deficiencies. When safety deficiencies are suspected or confirmed, the TSB advises the appropriate authority without waiting until publication of the final report.
  3. Report phase: a confidential draft report is approved by the Board and sent to persons and corporations who are directly concerned by the report. They then have the opportunity to dispute or correct information they believe to be incorrect. The Board considers all representations before approving the final report, which is subsequently released to the public.

For more information, see our Investigation process page.

The TSB is an independent agency that investigates air, marine, pipeline, and rail transportation occurrences. Its sole aim is the advancement of transportation safety. It is not the function of the Board to assign fault or determine civil or criminal liability.

Date modified: